Best clean amps for guitar pedals

Having your entire rig “at your feet” is a growing trend among guitar players, especially those that do a lot of traveling. Renting or relying on third party backline can be a nightmare for a number of reasons, so it’s become not only useful, but somewhat necessary, to be able to get “your sound” with your pedal chain alone.

Building your rig this way provides a blank canvas for painting any tone. Here are five of the best clean amps for pedals.

What Makes a Good Pedal Amp?

A few factors go into making an amp that is a solid, clean platform for your pedals. A healthy amount of headroom on tap is a must. Gain pedals especially work well in a high headroom scenario.

With smaller, underpowered amps they can get overly compressed and sound thin. Some pedals sound better going into a driven, or slightly dirty, amp. The Fuzz Face is a perfect example. Wattage is also a consideration Usually 60W and upward seems to be a consensus starting point.

The last feature a lot of pedal gurus look for in an amp is an effects loop. This lets you insert pedals (like reverbs and delays) between the preamp and power amp sections for maximum clarity and efficiency.

You can get pretty experimental with it, but at its fundamental it allows you to choose which effects come after the gain from the preamp.

Gain staging is critical when getting all of your juice from your pedals. High headroom amps don’t have the same saturation point that others do. If you like to push your preamp, these amps might not be the best choice.

Tube or Solid-state?

You have three main types of amplifiers to choose from: tube, modeling/digital, and solid-state. So, which provides the best platform for your robust pedal chain?

It’s really up to you. Solid-state and modeling amps can sound anemic and lacking “mojo” to some. I have an old Vox Pathfinder 15R that sounds amazing with pedals (not humbuckers, though…) There is also the Roland JC line, which is one of the reigning top choices for pedal aficionados.

Best solid-state clean amp for pedals: Roland Jazz Chorus Line

Best solid-state clean amp for pedals

Roland Jazz Chorus Line

Shimmering clean sounds and a historic chorus section make this amp one of the absolute best for clean pedals.

Pros

Timeless clean sounds

Onboard chorus

Light and easily portable despite its size

Works with a lot of genres

Cons

Might be a little too thin sounding for certain pedal setups

Buy From

musician’s friend

guitar center

reverb

sam ash

amazon

The crisp cleans and deep stereo chorus off the JC line are well-known. Due to the build focus on clean sounds, these are the perfect platform for guitar pedals. They are loud, but are available in a variety of wattages to cater to how much volume you need to pump.

Stereo I/O and effects loop lets you integrate even the most complex pedal chains. After all, it is legendary in genres like shoegaze and indie. And they love their pedals!

Best high-end clean amp for pedals: Supro 1968RK

Best high-end clean amp for pedals

Supro 1968RK

This reasonably sized combo amp from the kings at Supro features Celestion speakers. It can also power external cabinets. There’s no effects loop, but it still sounds great with pedals.

Pros

Smaller format makes transport easy

Celestion speakers

Can power external cabinets

Cons

Might be too expensive for some

No effects loop

Buy From

musician’s friend

guitar center

reverb

amazon

If you’re looking for a high end tube amp with a retro aesthetic and crystal clear clean sounds this is it. It’s a convenient 25W, 1×12 combo that comes with Celestion speakers, and effects loop, and can power an external cabinet.

Supro has really restored themselves to their former glory. With amps that sounds this good it’s no wonder why.

Best clean tube amp for pedals: Fender ’65 Deluxe Reverb

Best clean tube amp for pedals

Fender ’65 Deluxe Reverb

One of Fender’s all-time classics got that reputation for a reason. This amp is a great mix of tone, portability, and power.

Pros

Small but powerful 22W, 2×10 combo amp

Works with any genre

One of Fender’s all-time classics for a reason

Cons

No effects loop

Some players might need more wattage

Buy From

musician’s friend

guitar center

reverb

SAM ASH

amazon

Fender clean sounds are second to none. And most of their amps have a reputation of working really well as one of the best clean amps for a pedal platform. The Deluxe is certainly one of these amps.

Perfect for a variety of styles, it has 22W pumping through a 2×10 and provides plenty of clean headroom for your pedalboard. There isn’t an effects loop, so everything has to go into the front end. Classic onboard spring reverb and vibrato mean you might even be able to lose a couple of pedals.

Best half stack for pedals: Marshall Astoria

Best half stack for pedals

Marshall Astoria

This interesting line from Marshall features a head with KT66 power tubes, 1×12 cabinet, effects loop, and a good EQ section.

Pros

Creamback speaker and KT66 power tubes provide classic British sounds

Effects loop

Good EQ section

Cons

Head and cabinet makes setup and transport take more time

Buy From

reverb

amazon

The Astoria is not your typical Marshall. It has an up-front clean tone that runs on KT66 power tubes. It’s a 1×12 combo with Creamback speaker. It has solid headroom and no trouble staying clean.

There are a few controls for fine tuning. Body adds some lows and low-midrange back in, and the Edge control works much like the familiar Presence. An effects loop adds further pedal integration options.

Even for a Marshall it’s not cheap. But if you’re looking for Marshall quality and a great marriage for your pedals at the same time there might not be a better option.

Best combo amp for pedals: Vox AC Series

Best combo amp for pedals

Vox AC Series

Vox’s classic amp line offers tones that can go from glassy breakup to warm overdrive. There are multiple sizes to choose from to fit your needs.

Pros

Classic Vox tone that goes from sparkling cleans to warm overdrive

Comes in multiple combo sizes

Cons

Might have too much midrange for some

Buy From

musician’s friend

guitar center

reverb

sam ash

amazon

The AC Series is the perfect example of a vintage amplifier that provides enough modern headroom to work with pretty much any pedal, proving it to be one of the best clean amps. There is a reason it is one of the most emulated types of amps when it comes to modelers.

The AC circuit is fantastic at cleaning up. Keeping the preamp gain fairly low and cranking the output provides that beautiful glassy breakup that works great with various gain pedals. There is a lot of midrange though, which might affect your pedal selection.

Best small format clean amp for pedals: Orange Pedal Baby

Best small format clean amp for pedals

Orange Pedal Baby

For the touring musician it doesn’t get more ergonomic. This 100W, small format head can power multiple cabinets and is designed to work with pedals.

Pros

Convenient size

100W

Can power 8ohm or 16ohm cabinets

Great for touring musicians

Cons

Only three controls

Might be too much wattage for some

Buy From

musician’s friend

guitar center

reverb

sam ash

amazon

Designed for the guitarist that gets all of their tone from what’s on the floor in front of them, this 100W Class A/B power amp can crank! Only three knobs are present, volume, bass, and treble controls.

The EQ is intentionally neutral. At 12 o’clock it defaults to transparent, so the equalization of your sound is totally dependent on your pedal settings.

When powering an external cabinet it provides the full 100W at 8 Ohms. As far as outputs, it has 8 Ohm and 16 Ohm connections. You can run it with two 16 Ohm cabs, but the output will be reduced to 70W. It’s ergonomic and purpose-built for the touring musician.

Best clean practice amp for guitar pedals: Positive Grid Spark MINI 10W

Best clean practice amp for guitar pedals

Positive Grid Spark MINI 10W

A battery-powered 10W practice amp with a suite of learning tools, Spark app integration, and 10,000+ tones.

Pros

Stereo

App integration

Bluetooth connectivity

10,000+ onboard tones through BIAS sound engine

Cons

Pricey for a practice amp

Small enclosure reduces stereo depth

Buy From

musician’s friend

guitar center

reverb

amazon

Practice amps come in a lot of forms. Most just offer simple controls in a small package that’s perfect for what they’re made to do. The stereo Spark MINI 10W is not one of those amps.

It’s only 10 watts, but it’s what’s under the hood that counts. It runs on Positive Grid’s BIAS tone engine to offer over 10,000 tones that include amp and effects models. The ToneCloud features a library of presets that’s always expanding through Spark MINI users around the globe.

There are a number of practice tools including bass and drum backing tracks that adapt to your playing through AI. The app helps you learn songs faster by displaying chords in real-time while you play. You can loop sections and slow down the tempo to make sure you nail each part perfectly.

At $229 it’s on the pricier side for a practice amp. But it’s powerful, portable, and a great platform for pedals. Just don’t forget about the versatile onboard sounds!

FAQ

What kind of amp is best for pedals?

Both tube and solid-state amps are great for pedals. It’s more about the features they offer that sets certain models apart. Not all amps have effects loops, and not all players want one, but it’s definitely handy to have access to one just in case.

Are solid state amps better for clean tone?

There are some misconceptions that solid-state amps are best for a clean tone. Models like the Roland Jazz Chorus is known for it’s amazing clean sounds, but the right tube amps can be just as good.

What kind of amp is best for pedals?

It all depends on what you need, what sound you’re going for, and what types of pedals you’re using. If you don’t like the sound of time-based effects going into the front end you at least want an effects loop. A good amp EQ can also help you adjust for how your pedal chain alters the sound.

Do you need a special amp for pedals?

Definitely not! Any guitar amp can run pedals, either in-line or through an effects loop. Some are a better platform for pedals than others, most often models that have a great clean sound.